Wexxar WF30T, Operation And Service Manual

Page: 43 / 190

WF30T Case Former Controls
5-30
8) Touch-sensitive Displays
On the
‘Main Control’
screen to the right of the
‘START’
button are several touch-sensitive displays - the
‘Total
Number of Cases’
value, and three box dimension buttons.
The ‘Actual CPM’ value is not touch-sensitive, but it
changes to 0 when the
‘Total Number of Cases’
is reset to
zero.
9) ‘Total Number of Cases’ Button and Display
The
‘Total Number of Cases’
display indicates the total
number of cases formed. This counter can be reset to zero
by touching the displayed value. When the
‘Total Number
of Cases’
value is touched, a pop-up window appears,
displaying the text ‘Are you sure you want to reset the CPM
Counter?’. Press
‘OK’
to confirm the change. When this
value is changed, the actual CPM value will become 0.
10) ‘Selected CPM’
Below the
‘Actual CPM’
value is the
‘Selected CPM’
value.
This value is not touch-sensitive, and cannot be changed on
the
‘Main Control’
screen.
11) ‘CASE DIMENSIONS’ Buttons
Below the
‘Selected CPM’
display is a display of three box
dimension settings. These settings are interactive
‘BOX
DIMENSIONS’
buttons. Touching any case dimension
values brings up the
‘BOX SETTINGS’
screen.
12) ‘Box Settings’ Screen
Figure 5-12: ‘Box Settings’ Screen
Figure 5-10: ‘Touch-sensitive
Displays
Figure 5-11: ‘Case
Dimension’ Buttons