Wexxar WF-10T, Operation And Service Manual

Page: 50 / 156

WF-10T Case Former Controls
5-38
24) ‘PLC Inputs’ Screen
The
‘PLC Inputs’
screen displays 24 function indicators, for 24 machine
functions. If one of the 24 machine components is not functioning, the
corresponding indicator will be flashing on and off. Note that the
function indicators are not buttons. They are not touch-sensitive. Touch
the
‘PREVIOUS’
button in the bottom right-hand corner of the screen to
return to the
‘Troubleshooting’
screen, or touch the
‘MAIN CONTROL’
button in the bottom left-hand corner of the screen to bring up the
‘Main
Control’
screen.
Figure 5-51: PLC Input Status Indicator Illuminated
25) ‘PLC OUTPUTS’ Button
In the center-right side of the
‘Troubleshooting’
screen is the
‘PLC
OUTPUTS’
button. Touch this button to access the
‘PLC Outputs’
screen.
Figure 5-49: 'PLC Inputs’ Screen
Figure 5-50: 'PLC
Inputs’ Status
Indicator
Figure 5-52: 'PLC
OUTPUTS’ Button