WD-12S
Rev. (202103)
Installation instructions
19
3.6
Installation and connection of auxiliary equipment and options
•
Once the machine is in place and has been adjusted horizontally and
vertically, the auxiliary equipment can be fitted.
•
The machine can be equipped with a number of options. Check what your
machine is equipped with, which will vary depending on market.
The various options normally place no specific requirement on the installation.
Brief descriptions of certain options are provided below.
3.6.1
ECO flow (condensing unit)
•
A hot and cold water connection is required.
•
The machine has a 15kW booster heater, but can also optionally be fitted
with a 12kW booster heater.
•
Automatic rinse cleaning of condensing battery.
•
“CO” is shown on the machine’s display when the condensing unit is active
and the function may then be cancelled.
•
May be retrofitted.
3.6.2
Cold water-connected machine
15kW booster heater.
3.6.3
Basket conveyor with grid sections
•
Foldable.
•
May be retrofitted.
