WD-11
Rev. 5.0 (202206)
Operating instructions
35
Checking, changing and removal of set start time
If the buttons have not been pressed for at least 60 seconds while in check infor-
mation mode, the display returns automatically to normal display mode.
Checking of set start times, days of the week:
Hold down the CHECK button for approx. 1 second until the display changes state.
•
By pressing repeatedly on CHECK,
you can scroll through every set start
time.
•
If several start time settings are
stored, they are numbered as r01,
r02 and so on.
•
Once you have scrolled past the last
stored start time, the display returns
to its normal state.
Checking of set start times, date:
Hold down the CHECK button for approx. 3 seconds.
•
By pressing repeatedly on CHECK,
you can scroll through every set start
time.
•
If several start time settings are
stored, they are numbered as r01,
r02 and so on.
•
Once you have scrolled past the last
stored start time, the display returns
to its normal state.
PULSE
90-9-05-019
PULSE
90-9-05-020
Summary of Contents for WD-11
Page 2: ......
