WD-100GR
Rev. 5.0 (202207)
Installation instructions
21
4. Run a number of washes complete with loads and check:
•
There are no water leaks
•
The hood switch works
•
The anti-crushing mechanism functions
•
The water temperatures are maintained
•
The washed items are clean
•
The washed items are dried
•
There is adequate water flow to the machine. Inform the customer if the wa-
ter flow and the water pressure for the incoming water are too low
•
The motor cut-off switch setting against the wiring diagram
5. Final check: Empty the machine and turn off the power using the power
switch.
•
Re-tighten all connections on contactors and circuit breakers
•
Check that all circuit breakers are set to the ON position
•
Set up the quick guide(s) supplied
6. Train and inform personnel concerning:
•
Washing
•
Care (daily, weekly and other frequencies)
•
The recommendations given concerning annual servicing
•
The fact that Wexiödisk’s original granules must be used (warranty condi-
tions)
3.8
Documentation
For correct use and servicing, it is essential that the documentation accompany-
ing the machine is made available to personnel who will be using the machine.
The installation and user manual, which describes handling and care among oth-
er things, should be stored near the machine.
Summary of Contents for WD-100GR
Page 2: ......
