14
Operation
6. After Use, turn off the heater on the master power switch (7)
(position O). The light in the switch turns off.
Remote Control
The control panel also appears on the remote control. It is used in
the same way as the control panel on the heater itself.
To replace the battery, push the locking piece in the battery drawer
as shown on the back of the remote and slide open the battery
drawer. Replace the battery with a fresh Battery CR2025. Please
observe correct polarity, the plus (+) pole must face to the back of
the remote.
Overheat Protection
The heater is equipped with a overheat protection. When internal
components of the heater reach a temperature that could cause
overheating or fire, the heater will automatically turn off.
Tip-Over Safety
The heater is equipped with a tip-over safety. if the heater is tipped
over, an internal switch will automatically turn the heater off. Once
the heater is returned to an upright position, the safety will reset. To
turn the heater back on, use the control panel on the heater.
Cleaning and Storing
Before cleaning, first unplug the heater. Do not pull the cord to
unplug from the wall socket but grasp the plug itself to unplug.
Do not wipe the heater with strong detergents or aggressive
chemicals in order not to damage the surfaces.
Wipe the heater with a lightly moistened cloth. Use detergent as
needed. Do not immerse it in water or any other liquid. Dry all
parts well before storing.
Clean the air vents with a brush.
Never try to clean the interior of the heater. Do not open the unit.
