Westport WEST ADR 80/02, User Manual

Page: 48 / 91

5.4. REAL-TIME DATA
e. The new values take effect immediately.
NOTE: After entering a new value and pressing enter, the displayed value
may revert back to the original. This is because the changed value may
cause system damage and the controller has rejected the modification.
Re-enter the desired value, or try a different one.
WARNING
Altering system variables during troubleshooting may cause
engine to stall.
WARNING
Altering system variables may increase hydraulic system
temperature, causing components to heat up. Avoid contact with
hydraulic plumbing and components to avoid burns.
CAUTION
Extended operation using altered system variables may reduce the
life of system components. Limit troubleshooting time with
altered variables.
CAUTION
All duty cycles parameters have a maximum limit, which is
different for each parameter. All values greater than the
maximum limit will be rejected by WEST.
5.4.3 Additional Features
While inside a data view, you can right click with the mouse to bring up a
menu enabling some additional features:
•
Fonts This feature (Fig. 5.12) allows the user to change the size of the
font used in the view.
•
Row Color This feature (Fig. 5.13) allows the change of color of a
selected row in the data view.
NOTE: Changes made in the Real-time Data window cannot be saved, and
must be re-applied when re-opening the window.
WEST User Manual 36