11
10
2.4 Charging your Terminal.
There are two options available to charge your terminal, either through connecting
the power source directly to the terminal or via the terminal base:
1� Connecting base station to power:
1� Insert the power cable into the power port on the terminal base�
2� Plug the AC power cord into a wall outlet or a surge protected power board�
3� Place terminal on the base to begin charging�
2� Alternate charging method:
1� Insert the power cable to the power port found on the side of the terminal�
2� Plug the AC power cord into a wall outlet or a surge protected power board�
Note:
It is recommended that you charge your terminal through the terminal base
as this will enable you to quickly return your terminal to charge mode between uses�
2.5 Manual Start and Shutdown.
i� Terminal Start-up:
When placed on the base, the Presto Smart VX-690 terminal will automatically
turn on� To turn on the terminal manually, hold the key down for 10 seconds
until the start-up screen is displayed on the terminal�
ii� Terminal Shutdown:
Hold the
key down for 10 seconds until the terminal displays the shutdown
verification screen� Keep holding the key until the Presto Smart VX-690
terminal shuts down (the terminal must be unplugged from the power supply
or removed from the base before attempting a manual shut down)�
3.0 Procedures.
3.1 Main Menu.
The terminal idle screen displays information such as the battery strength,
connection strength, Serial Number, Network name, IP address and the button
to initiate Pairing the POS�
The payment application main menu/idle screen can be accessed via the
key combo “ENTER+3”�
Please pair this
device with your
Point of Sale
(POS) system.
Serial Number: 329-301-382
Network: win_sim SSID
IP address: not connected
Pair with POS
Connected to
‘YOUR POS NAME’
Presto
SPI VAA screen
Payment application screen
