23
22
6.2 How to process a Purchase with Cash Out Transaction
initiated from the POS.
If enabled, your terminal can process Purchase with Cash Out transactions, available
from Cheque or Savings accounts only�
Note:
In integration mode, all transactions need to be initiated from the POS�
Step
Terminal Display
Action
1�
Insert/Swipe
card
Tap card
Total Amount
AUD
6
.00
Once the Purchase with Cash Out transaction
has been initiated from the POS, the terminal
will immediately change to the present
card screen�
The Total Amount displayed will be inclusive of
the Cash Out amount�
Insert, swipe or tap the customer’s card
(See Section 3�0 Procedures)�
2�
1. Cheque
2. Savings
3. Credit
Select Account
Select the required account “Cheque” or
“Savings” and press the touch screen or
the key�
3�
Signature
PIN or Enter
Total Amount
AUD
6
.00
The cardholder can now enter their Personal
Identification Number (PIN)� Once entry is
complete the cardholder can press the touch
screen or the key�
Note:
If the customer does not wish to enter
a PIN it can be bypassed for certain card types
by leaving the PIN blank and pressing the
touch screen or the key�
Step
Terminal Display
Action
4�
Please Wait
The terminal will connect to the Bank and
begin processing the purchase�
5�
Remove Card
If a chip card was inserted, and is yet to be
removed, this prompt will appear� Remove the
card at this prompt� The terminal will beep as a
reminder if the card is not removed�
6�
Approved
<Declined Reason>
Press ENTER Key
The terminal will display the transaction result
and send the response back to the POS�
