5
VERTICAL MOUNTING INSTRUCTIONS
Make sure the French fry cutter is mounted to a
solid surface. DO NOT mount to drywall that has no
structural support behind it. The French fry cutter
needs to be mounted to the studs of the wall or any
solid surface.
When mounting the French fry cutter, position it at a
distance from the floor that is a comfortable height
and will provide the best leverage for cutting a potato.
Mount the French fry cutter through the mounting
holes on the 4 feet using appropriately sized bolts
(not included) (
FIGURE 3
).
HORIZONTAL MOUNTING INSTRUCTIONS
FIGURE 3
Mounting
Hole
on the
Foot
To mount your French fry cutter on a tabletop or stand, simply set the French
fry cutter down on its legs and secure to the work surface using appropriately
sized screws (not included).
NOTE:
Even though horizontal mounting is an option, it is recommended to mount
the French fry cutter vertically on a structurally supported wall. More leverage can be
applied when mounted vertically than can be applied when mounted horizontally.
HORIZONTAL SUCTION CUP MOUNTING INSTRUCTIONS
To install the suction cup feet to your French fry cutter, place the bolt of each suction
cup through the holes in the feet of the French fry cutter. Thread the nut onto each
bolt tightly (
FIGURE 4
). Press firmly down on the French fry cutter to create suction
between the work surface and the suction cup feet. Suction cups work best on a
smooth, clean horizontal surface. To create more of a suction, a damp cloth can be
swiped across the suction cup prior to adhering. Be certain to check the stability of the
French fry cutter to the work surface prior to use.
NOTE:
The suction cups are not meant to be used for vertical mounting.
Use the suction cups for horizontal mounting only.
FIGURE 4
Suction Cup
Feet
Nut
Suction
Cup Bolt
Mounting
Hole
on the
Foot
