Pivot
Knob
ASSEMBLY INSTRUCTIONS
AS A GRINDER ATTACHMENT*
Perform steps 1 through 11 in the “Assembly Instructions for Manual Operation”.
12. Make sure the grinder is turned “off” and disconnected from the power
source.
13. Align the output shaft on the grinder with the Drive Shaft on the Meat Mixer.
Adjust the Feet as necessary. Be sure to retighten the Locking Nuts.
14. Connect the grinder to the Meat Mixer. You may have to rotate the Drive
Shaft to better align the splines with the grooves in the grinder output shaft. The
Drive Shaft can be turned with the Pivot Knob.
15. Make sure the grinder is fully seated to the Meat Mixer.
16. Tighten the Locking Knob on the grinder head to secure the two machines
together.
17. Install the Clear Lid
(FIGURE 7
). DO NOT use the Meat Mixer without the
Clear Lid in place. Severe injury could result!
FIGURE 7
Clear
Lid
Electric
Grinder
7
ENGLISH INSTRUCTIONS
