Westinghouse Outdoor Power Equipment, LLC | 13
CARE AND MAINTENANCE
on/off switch to the “on” position and pull the trigger
for 5 seconds in order to activate the pump and
purge the pump saver through the pump system and
hose.
c.
Once you are done, turn the on/off switch to the
“off” position, pull the trigger to release the internal
pressure and then disconnect the hose and
accessories from the power washer.
6.
Remove hose from spray gun.
7.
Remove lance from spray gun. Place the gun in the
holder on the side of the unit. Place lance into any of the
slots in the back of the unit.
8.
Hook the power cord around the power cord holder.
REPLACEMENT PARTS
For replacement parts, call our customer service
department at 1-855-944-3571.
