STEP 1.
Remove the contents from the box and check for any damage. Verify all parts against the parts list.
STEP 2.
Read and understand instructions completely before beginning installation.
STEP 3
.
Install mount brackets to vehicle body using (2) M8-1.25 x 30MM hex head bolts, (2) M8 split lock washers and
(2) M8 flat washers. Leave loose.
STEP 4.
Fasten mount brace to vehicle body using (1)M8-1.25 x 30MM hex head bolt, (1) M8 split lock washer and (1)
M8 flat washer. Attach other end of mount brace to mount bracket using (1) M8-1.25 x 30MM hex head bolt, (2)
M8 flat washers,(1) M8 split lock washer and (1) M8-1.25 hex nut. Leave loose.
STEP 5.
Position step bar in place and fasten to mount brackets using (4) 3/8-16 x 1.00” button head cap screws and (4)
3/8” internal tooth lock washers. Leave loose.
STEP 6.
Level and adjust step bar as desired. Torque 8MM hardware to 25 FT. LBS. and 3/8” hardware to 30 FT. LBS.
1
STEP BAR, DRIVER SIDE
13MM SOCKET
4
MOUNT BRACKET
7/32” HEX WRENCH (ALLEN)
4
MOUNT BRACE
RATCHET
4
M8-1.25 HEX NUT
TORQUE WRENCH
16
M8 SPLIT LOCK WASHER
20
M8 FLAT WASHER
16
M8-1.25 X 30MM HEX HEAD BOLT
NOTE:
FASTENERS ARE CONTAINED
8
3/8-16 X 1.00” BUTTON HEAD CAP SCREW
IN BOLT KIT 60-1214.
8
3/8” INTERNAL TOOTH LOCK WASHER
PARTS KIT CONTENTS
TOOLS REQUIRED
QTY
DESCRIPTION
1
STEP BAR, PASSENGER SIDE
13MM WRENCH
75-0313 Revision A 05/16/02
I N S TA L L AT I O N I N S T R U C T I O N S
APPLICATION: 2002-UP CHEVROLET TRAILBLAZER
2002-UP GMC ENVOY
2002-UP OLDSMOBILE BRAVADA
2002-UP CHEVROLET TRAILBLAZER EXT
2002-UP GMC ENVOY XL
STEP BAR
ASSEMBLIES
25-2130
25-2135
26-2130
26-2135
25-2240
25-2245
26-2240
26-2245
