INSTALLATION INSTRUCTION MANUAL
LED
WALL
PACK
LIGHT,
100-277VAC
MODELS:
LWPX-30-80W-MCTP
Model
number
parameter
list:
CAUTION: This product use an input 100-277VAC driver of wide range voltage.
1. Introduction
This LED Wall-Packs light uses the latest in solid state lighting technology for long life,
low maintenance, and high efficiency.
An
internal
power-factor-corrected
switch-mode
supply
allows
it
to
be
used
from
any
nominal
100V-277V,
60Hz
AC
supply
without
any
variation
in
light
output.
Suitable
for
use
in
the
following
locations:
•
Ambient
Temp:
-
4
~+
104
°
F
•
Wet
Locations
Note
: Save these instructions for future reference.
2. Installation
Item
Model
Input Voltage
Watt
Input Current
A
LWPX-30-80W-MCTP
100-277VAC
30W/40W/60W/80W 1.1A MAX
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed,
inspected, and maintained by a qualified electrician only, in accordance with all applicable
electrical codes.
Warning:
To avoid electric shock:
•
Be certain electrical power is OFF before and during installation and maintenance.
•
Luminaire must be connected to a wiring system with an equipment-grounding conductor.
WESTGATE MFG., INC | 2462 E 28th Street, Vernon, CA 90058 USA |1-323-826-9490|[email protected]
