WESTGATE MFG., INC | 2041 DAVIE AVE, COMMERCE, CA 90040, United States | 1-323-826-9490 | [email protected]
WESTGATE
INSTALLATION INSTRUCTION MANUAL
LED WALLPACKS LIGHT,
100-277VAC
Rev A October 2013
MODELS:
LWP-20aa; LWP-30aa;
Model number parameter list:
CAUTION: This product use an input 100-277VAC driver of wide range voltage, but the actual working voltage is depend on
the input voltage of the photocell that installed on the product. Normally the input voltage of photocell is
120V/208V/240V/277V single range, and also have 120-277VAC wide range. Please pay attention when installation.
1.
Introduction
This LED Wall-Packs light uses the latest in solid state lighting technology for long life, low
maintenance, and high efficiency.
The same as traditional HID lighting, it could be mounted a standard photocell on the enclosure, to
make it completely suitable for street lighting.
An internal power-factor-corrected switch-mode supply allows it to be used from
any nominal 100V-277V, 60Hz AC supply without any variation in light
output.
Suitable for use in the following locations:
•
Ambient Temp: -20~+40°C
•
Wet Locations
Note
: Save these instructions for future reference.
2.
Installation
Item
Model
Input Voltage
Power Factor
Watt
Input Current
Weight
A
LWP-20aa
100-277VAC
≥
0.92
20W
0.3A
--Kg
B
LWP-30aa
30W
0.38A
--Kg
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed,
inspected, and maintained by a qualified electrician only, in accordance with all applicable
electrical codes.
Warning:
To avoid electric shock:
•
Be certain electrical power is OFF before and during installation and maintenance.
•
Luminaire must be connected to a wiring system with an equipment-grounding conductor.
