MY PASSPORT ELITE
USER MANUAL
INSTALLING AN SES DRIVER – 59
Windows Vista
After you physically connect the drive as shown in Figure 2 on page 6, two or three
screens may pop up, depending on your computer setup.
Installing the Driver Automatically
To install the SES driver automatically, you must be connected to the Internet.
Note:
If Autoplay is enabled, two extra screens may display at the same time as
the Found New Hardware screen. Close those two screens.
1.
On the Found New Hardware screen, click
Yes, search online this time only
.
The driver is automatically installed.
Installing the Driver Manually
You might want to install the SES driver manually, for example, if you are not connected
to the Internet.
Note:
If Autoplay is enabled, two extra screens may display at the same time as
the Found New Hardware screen. Close those two screens.
1.
On the New Found Hardware - WD SES Device wizard screen, click
Locate and
install driver software
.
