800-1910 (REV. 4-87)
WD1002WD1003
USER’S GUIDE
Page 1: ...800 1910 REV 4 87 WD1002 WD1003 WD1002 WD1003 USER S GUIDE...
Page 2: ...in the lower left hand corner of J1 Pin 1 is in the upper left hand corner of J5 5 Connect control cable to drive 6 Attach 20 pin data connector to J2 drive C or 1 for the WD1002 WAH or WD1003 WAH J4...
Page 3: ...rd factory setting Status read is latched Static drive select SELECT asserted except during RESET Used for IBM Personal Computer ATs NOTE Do NOT MOVE PRIMARY ADDRESS JUMPERS UNLESS YOUR OPERATING SYST...
Page 4: ...al controller 1 Insert your system Diagnostic Diskette or equivalent 2 Turn on the power 3 Boot diagnostic and select setup option 4 Set clock etc CAUTION Avoid system damage by consulting your Techni...
