WD Scorpio ML160M
Installation and Setup Procedures
2679-701205-A00
RELEASED 1/16/09 (WD CONFIDENTIAL)
35
5.2.3
Grounding
For best results, mount the drive with all four screws in the side grounded to the chassis
(positions A, C, D, and B below). You must ground the drive with at least one mounting screw.
Figure 5-3. Grounding Diagram
Side Mounting
–
Use four metal screws in A, C, D, and B. If less than four screws are used,
remove in this order: C, D, and then B. You must use a screw in position A.
Top face Mounting–
Use four metal screws in 1, 2, 3, and 4. If less than four screws are used,
remove in this order: 2, 4, and then 3. You must use a screw in position 1.
