EX800M
Specifications
2679-771339-A05
RELEASED 8/13/13
11
2.4.5
Ripple
2.4.6
Power Connectors and Cables
SATA Connectors
For information on SATA data connectors, refer to the Serial ATA 1.0 specification available for
download at
www.serialata.org
.
At the time of this printing, there are no published standards for SATA power/mating connectors or
power/data cable wire gauges.
Cabling Requirements for SATA
The SATA cable consists of four conductors in two differential pairs. The cable may also include drain
wires to be terminated to the ground pins in the SATA cable receptacle connectors. See the SATA 1.0
specification for cable specifications. The cable's maximum length is one meter.
It is recommended that customers use SATA cable receptacles with internal bumps to provide
additional retention when mating with an enterprise hot-plug optimized hard drive connector.
+12 VDC
+5 VDC
Maximum
Frequency
200 mV (double amplitude)
0-30 MHz
100 mV (double amplitude)
0-30 MHz