Western Digital My Cloud EX2 Ultra User Manual Download Page 103

Page: 103 / 169

MANAGING APPS ON WD MY CLOUD EX2

WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL

Adding an App

Use the following steps to add an app to your WD My Cloud EX2 device.

1. On the navigation bar, click

Apps

to display the Apps screen.

2. Click the

Add an App

icon

in the lower left side of the screen.

The first time you add an app, the Terms of Service screen displays. Read and accept
the agreement.

3. On the Add an App screen, place a check next to the app you’d like to add to the

device.

4. For details about the app, click

Details

Close the Details screen.

5. Place a check next to the app(s) you’d like to add to your device, and then click

Install

The selected apps are added to your device.

Summary of Contents for My Cloud EX2 Ultra










































































































































































Search results

Summary of Contents for My Cloud EX2 Ultra

Reviews:

Western Digital My Cloud EX2 Ultra, User Manual, Page: 103 / 169

Search results

Summary of Contents for My Cloud EX2 Ultra

Reviews: