User Guide
5. System Management
5.5 Partially Populated Enclosures
No errors
Note:
If the nickname contains one or more spaces, enclose the name in either
single quotes (i.e. 'device nickname') or double quotes (i.e. "device nickname").
If the command was successful,
No errors
will be returned.
Step 4 :
Repeat the
sg_ses <device> -p0xf
command to view the
Subenclosure Nickname
page and
verify that the nickname was set as intended:
# sg_ses <device> -p0xf
<manufacturer> <regulatorymodel> <firmwareversion>
Subenclosure nickname status diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
subenclosure identifier: 0
nickname status: 0x0
nickname additional status: 0x0
nickname language code:
nickname: <nickname>
Clear the Nickname
Step 5 :
If needed, use the
sg_ses <device> -p0xf -c --nickname=
command to clear the
subenclosure's nickname (set it to an empty string):
# sg_ses <device> -p0xf -c --nickname=
<manufacturer> <regulatorymodel> <firmwareversion>
No errors
If the command was successful,
No errors
will be returned.
Step 6 :
Repeat the
sg_ses <device> -p0xf
command to view the
Subenclosure Nickname
page and
verify that the nickname was cleared:
# sg_ses <device> -p0xf
<manufacturer> <regulatorymodel> <firmwareversion>
Subenclosure nickname status diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
subenclosure identifier: 0
nickname status: 0x0
nickname additional status: 0x0
nickname language code:
nickname:
5.5
Partially Populated Enclosures
204