Western Digital ActiveScale P100, Support Manual

Page: 16 / 140

ActiveScale™ P100 Support Guide
14
1.2 System specification summary
The following table is a summary of specifications relevant to the ActiveScale P100 system.
1.3 Available kits and upgrades
This section describes the upgrades and supplemental kits that are available for the ActiveScale P100.
1.3.1 Scale up kits
Scale up kits consist of six Storage Nodes. You can add two scale up kits to a base ActiveScale P100
configuration.
Table 1-2. System specification summary
Condition (fully configured) Non-operating Operating
Altitude -984 ft to 39,371 ft
(-300 m to 12,000 m) -984 ft to 10,000 ft
(-300 m to 3,048 m)
Height in rack units (U) • Base configuration —12U
• Scale-up kit —6U
• System Expansion Node kit
1
—1U
1.Values are for one additional node. System Expansion Node kits can contain up to three additional nodes.
Power requirements (typical/
maximum) N/A • Base configuration —1.85 to 2.03 kW
• Base +1 configuration—3.23 to 3.54 kW
• Base +2 configuration— 4.61 to 5.05 kW
•
Scale-Up kit —1.38 to 1.51 kW
• System Expansion Node kit
1
—0.195 to
0.23 kW
Relative humidity 20% to 95% non-condensing 20% to 80% non-condensing
Relative humidity gradient 30% per hour maximum 30% per hour maximum
System width and depth • Width —17.6 in (448.2 mm)
• Depth —35 in (881 mm)
Temperature -40°F to 158°F (-40°C to 70°C) 50°F to 95°F (10°C to 35°C)
Temperature de-rating 33.8°F per 984.2 ft above 9842.5 ft
(1°C per 300 m above 3000 m) 33.8°F per 984.2 ft above 3116.8 ft
(1°C per 300 m above 950 m)
Temperature gradient 86°F (30°C)/hour 68°F (20°C)/hour
Thermal output N/A • Base system —6.31 to 6.92 KBTU/hour
• Scale-up kit —4.70 to 5.15 KBTU/hour
• System Expansion Node kit
1
—0.665 to
0.785 KBTU/hour
Weight • Base configuration — 469 lbs (212.4 kg)
• Individual Scale up kit — 348 lbs (157.8 kg)
• System Expansion Node kit
1
—27 lbs (12.2 kg)