Western Digital ActiveScale P100, Support Manual

Page: 130 / 140

ActiveScale™ P100 Support Guide
128
B.7 Solid state drive specifications (System and Storage Nodes)
The following table displays the Western Digital Corporation qualified solid state drives (SSD) contained
within the System Nodes and Storage Nodes.
Table B-6. 14 TB hard disk drive specification summary
Condition Specification
Model Ultrastar
®
He14
Capacity 14 TB
Dimensions • Width —4 in (101.6 (+/-0.25) mm)
• Depth —5.78 in (147mm)
• Height —1 in (26.1mm)
Hot swappable Yes
1
1.Only hot swappable after decommissioning.
Operating relative humidity 5% to 95%, non-condensing
Operating Temperature (internal) 0°C to 70° C (32°F to 158°F)
Quantity (per component - 12 per node) 72 - 216 per full capacity. 12 per storage node.
Replacement part number 1EX1892
Replacement parts N/A - Replacement part number includes drive carrier, drive,
and screws.
Type SAS
Table B-7. 480 GB solid state drive specification summary
Condition Specification
Model SanDisk CloudSpeed Eco
™
Gen. II SATA SSD
Capacity 480 GB
Dimensions • Width —2.75 in (69.85 mm)
• Depth —3.9 in (100.2 mm)
• Height —.28 in (7.17 mm)
Hot Swappable Yes
1
1.Only hot swappable after decommissioning.
Operating relative humidity 5% to 95%, non-condensing
Operating temperature (internal) 0° to 70° C (32°F to 158°F)
Quantity (per component) • One per Storage Node
• Four per System Node
Replacement part number • System Node—1EX0221
• Storage Node—1EX0226
Type SATA