ActiveScale™ P100 Support Guide
109
Important:
If you are installing System Expansion Nodes in multiple racks,
install all of the kits in a single rack before moving on to the next rack.
7.7 Programming the System Interconnects
After cabling the System Expansion Nodes, log into the System Interconnect and open ports 38 (for
System Expansion Node 1), 40 (for System Expansion Node 2) and 42 (for System Expansion Node 3).
Note:
The VLANs on each port will be automatically enabled while running the
System Expansion Node configuration wizard.
To program each System Interconnect:
Scale out rack 3
3
Scale out rack 4
3
Scale out rack 5
2
Scale out rack 6
1
Scale out rack 7
1
Scale out rack 8
2
21 total
Table 7-3. Multi-site example configuration
Rack
System Expansion Nodes per
ActiveScale P100 ActiveScale
X100 system
Summary of Contents for ActiveScale P100
