3.4. Connector Information
3.4.1. Power Input and I/O Connection
Illustration
Position
Product
marking
Direction
Description
DI+
DI-
NO
C
+DC2
+DC1
COM
2
1
1 - I/O connection
DI+
Input
Digital in positive
DI-
Input
Digital in negative
C
Output
Relay output common
NO
Output
Relay output normally open
2 - Power input
+DC1
Input
DC1 positive
+DC2
Input
DC2 positive
COM
Input
Common
COM
Input
Table 3. Power input and I/O connection
Unit condition
Status NO- C
Unpowered / pre-operational or Alarm active
OPEN
Operational and Alarm inactive
CLOSED
Table 4. I/O connection status output
WARNING - POWER SUPPLY CONNECTION
There are safety regulations on which power sources that shall be used in
conjunction with the product. Refer to Interface Specifications.
3.4.2. Console Port
The console port can be used to connect to the CLI (Command Line Interface). The
console connector is a micro USB cable that connects to a FTDI FT232R USB to serial
converter internally. For drivers, refer to
and download the appropriate
VCP driver
12
Lynx 5600 Series
