2.5.1. Agency Approvals and Standards Compliance
Approvals and Standards
Climate
• EN 50125-3, Railway applications – Environmental conditions for equipment,
Part 3: Equipment for signalling and telecommunications
EMC
• EN 50121-4, Railway applications - Electromagnetic compatibility. Part 4:
Emission and immunity of the signalling and telecommunications apparatus
• ETSI EN 301 489-1, Electromagnetic compatibility (EMC) and Radio
spectrum Matters (ERM) for radio equipment and services - Part 1: Common
technical requirements
• ETSI EN 301 489-17, Electromagnetic compatibility (EMC) and Radio
spectrum Matters (ERM) for radio equipment - Part 17: Specific conditions
for Broadband Data Transmission Systems
Mechanical
(Shock and vibration)
• EN 50125-3, Outside the track
Insulation
(Coordination and test)
• EN 50124-1, Railway applications – Insulation coordination
Radio communication
• ETSI EN 300 328, Wideband transmission systems; Data transmission
equipment operating in the 2,4 GHz
• ETSI EN 301 893, 5 GHz RLAN
• IEEE 802.11, Wireless LAN Medium Access Control (MAC) and Physical
Layer (PHY) Specifications
• FCC-47-15, Radio frequency devices
Safety
• EN/IEC 62368-1, Safety Requirements for audio/video, information and
communication technology equipment
• EN 45545-2, Fire protection on railway vehicles
• NFPA 130, Fire protection for fixed guideway transit and passenger rail
system
2.5.2. United States - FCC
The enclosed product complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) this product may not cause harmful interference and (ii.) this
product must accept any interference received, including interference that may cause
undesired operation.
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation
distance of 20 cm or more should be maintained between the antenna of this product and
persons during operation. To ensure compliance, operations at closer distances than this
are not recommended.
This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This product
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Ibex-RT-370 Series
9
