Attachments
10
Operation
10.1
Operation description
Start in rest position, then bring from rest position into working position
Depending on the debris and sweeping amount, a reaction force is felt on the
hand-held machine, and must be countered by the operator accordingly. If the
reaction force is too strong for the operator, the already formed "swath" must
be picked up. Too strong a reaction force can also be caused by a wrong set
brush height. If this is the case, the brush height must be adjusted according to
ch. 9.2. A sudden reaction force (kickback) can also occur when pushing with
the rotating sweeping brush against a firm resistance.
Caution is needed!
10.2
Service interval
The first 50 hours of operation have a major impact on the performance and
life of the machine. The following considerations should be taken into account
to ensure you enjoy your
WR 870
for a long time.
Repeatedly inspect nuts, bolts and screws etc. and re-tighten if
necessary.
Proper maintenance is of crucial
importance for the operational safety of the vehicle.
Page
31
of
59
After each use, connect the WR 870 Battery to the charger
