Section 311-580-20B
030-101527 Rev. B
26
0407IBRB
NIU QUERY AND RESPONSES VIA TL1 COMMANDS
APPENDIX C
1. TL1 Commands
TL1 Command and responses are transmitted in the Facility Data Link using the command SND−CMD−FDL via the
modified LAPB protocol. Below is a short glossary of characters used in the TL1 Command:
<cr>Carriage Return
<lf>Line Feed
^Space
<ctag>
Correlation tag. This is an optional field and may be left blank
ED-T1 Command
This command is used to provision the PROACT unit
Command:
ED
−
T1:::<ctag>:::<optnm>=<optstg>;
Example: Set Transmit LBO=7.5 dB
ED
−
T1::::::WSTTXLBO=7.5;
RTRV-T1 Command
This command is used to query the provision settings on the PROACT unit
Command:
RTRV
−
T1:::<ctag>:::<optnm>;
Valid Response:
<cr><lf>
<lf>
^^^SJPM^YY
−
MM
−
DD^HH:MM:SS<cr><lf>
M^^<ctag>^COMPLD<cr><lf>
^^^<optnm>=<optstg><cr><lf>
;
List of Options
This is a comprehensive list of command line options. Simply use the codes identified in the columns below when
configuring command lines.
OPTION
OPTNM
OPTSTG
Monitored Line Coding
WSTLMONLC
B8ZS, AMI
CLOS Response
WSTCLOSRSP
NONE, LB, Idle, AIS, AIS-CI
RAI-CI Option
WSTRAICI
DIS, ENA
Real Time PM Mode
WSTRTPM
NONE, NPRM, SPRM, NSPRM
CPE-to-FAC Regen
WSTTRMTRGN
DIS, ENA
FAC-to-CPE Regen
WSTRCVRGN
DIS, ENA
Loopback Timeout
WSTLBTO
DIS, 20, 60, 120, 1440
Addressable Loopback Mode
WSTLBMODE
NORM, ADDR
Circuit ID
WSTCKTID
<
ASCII string up to 20 characters
>
Reset All Options to Default
WSTSDEF
(
NA
)
FAC-to-CPE Level (RTRV Only)
WSTRCVLVL
<
nn.n
>dBdsx
CPE-to-FAC Level (RTRV Only)
WSTTRMTLVL
<
nn.n
>dBdsx
FAC-to-CPE LBO
WSTRCVLBO
0, 7.5, 15
CPE-to-FAC LBO
WSTTRMTLBO
0, 7.5, 15, 22.5, AB15, AB22.5
CPE-to-FAC Auto Binder LBO
WSTBNDRLVL
<nn.n>dB
Example: Query Transmit LBO setting
RTRV
−
T1::::::WSTTXLBO;
Figure 27. Appendix C − NIU Query and Responses Via TL1 Commands
