WESTELL.COM
Remote RMM-700 Installation Guide
Installation
1-800-377-8766
Page 11
3. The SIM chip slides into a card holder on the back edge of the circuit board, shown
in Figure 1-2. Follow the steps shown in Figure 1-3 to install the SIM.
.
Figure 1-2
The SIM Chip is shown partially inserted into its card holder.
Figure 1-3
Installation steps for the SIM.
4. To install the Phone Module, start by inserting the two antenna terminals into the
openings in the front of the unit. Turn both wires so they are oriented to connect
SIM Chip
1. Slide metal lock back (toward hinge)
2. Open card holder
3. Insert SIM
4. Press card holder into place against the
circuit board and slide metal lock forward
to lock holder into place
