30
UM380 03 010
InterChange iQ 2000 and 2000plus
The icons are listed below in order of precedence, highest first:
•
Red Cross: an error exists on the module or the module is decommissioned
•
Green Tick: no error conditions exist on the module
•
No Icon: module is not present
The dialogue is updated in near real-time by notification messages from the target system.
4.8.2 System Page
There is always a
System
page on the dialogue, as shown in (Figure 17) above. It contains
information about the software installed, the system status, errors status and alarm states.
4.8.3 Module Page
The
Module
page (Figure 18) displays different information, depending upon the status of
the module.
Port Protocol
The
Module
page lists each port and displays the protocol that those ports are set to. If the
module is physically absent, install a new module. Use the
Control
option from the main
menu to commission the module.
Layer 1
windows show the status of the port and have a pull-down list which show the
details of the port.
Figure 18: Diagnostics Module Page.
Layer 2
windows show the status of the layer and reports any problems with Layer 1.
Layer 3
windows show the status of the layer and reports problems with Layers 1 or 2.
