background image

Instruction Manual & Warranty

TM09DHB

Questions?, ¿Preguntas? 201.661.9944

 

©2010 AmerTac™

250 Boulder Drive

Breinigsville, PA 18031

www.amertac.com

Made in China

Fabriqué en Chine/Hecho en China

I09-0049-A

This is a 24 hour mechanical timer with 30 minutes interval settings
and 24 On/Off cycles per day. Ideal for home security and energy saving
applications.
1. Point arrow on face of dial to current time of day.
2. Locate pegs on the outer edge of timer’s dial. Be sure all pegs are
pushed in before programming. Select a time period you want the
appliance turned on, then push out ALL the pegs that fall on or within
that period. For example, to have the timer turn an appliance on at
11PM and off at 3AM, push out pegs representing 11PM and 3AM,
and ALL pegs in between.
3. Set switch to TIMER ON position.
4. Plug appliance into outlets of timer.
5. Plug timer into an electrical outlet convenient to the appliance to be
controlled. The appliance will now turn on and off at the times you
have set.

Note

To override the timer and use your appliance normally, set the switch
to the OUTLET ON position. This will deactivate the timer’s control of
the appliance, but the timer’s dial will still show the current time of day.
To reactivate the timer’s control of the appliance, set the timer’s switch
to TIMER ON position. In case of power failure, reset the time of day
as explained in step 1.

Warning

- Do not exceed electrical rating
- Indoor use only
- Keep away from children
- Plug directly into protected electrical outlet
- Unplug timer before cleaning
- Fully insert plug
- Do not use in wet locations
- Do not use damaged cord set

Figure 1

 – Shows timer set to turn appliance ON at 11PM

and OFF at 3AM. Notice ALL pegs between 11PM and 3AM
have been pushed out. Current time is 9PM.

Ratings

125V~, 60Hz
15 Amps, 1875 Watts Resistive
10 Amps, 1250 Watts Tungsten

Limited One Year Warranty

AmerTac

 warrants this product to be free from defects in material and workmanship

 

for a period of one year from the date of purchase. AmerTac’s obligations are limited

 

to repairing or replacing any defective unit and are effective only if such units are

 

returned within one year of the purchase date to AmerTac, 

250 Boulder Drive, 

Breinigsville, PA 18031

. Warranty void if damage is

 

due to misuse or improper 

installation.  In  no  circumstance  will  AmerTac  be  liable

 

for  consequential  or 

incidental damages relating in any way to this product.

Indoor

Daily Timer

 with 2 grounded outlets

Reviews: