Instructions for Installation of Rechargeable Light Bars
A. Micro USB Micro charging port
B. Charge Indicator: Red when charging, Blue when fully charged
C. Slide Switch: 3000K / 4000K / 5000K / OFF used to set CCT or turn OFF
D. PIR senses motion when AUTO mode is selected
E. Touch Switch: change from Manual / AUTO
F. Slide Magnets
G. Key hole
Models: BL-BAR12RC / BL-CLN5RC / BL-BAR4RC
INCLUDES
BL-BAR12RC/ BL-CLNG5RC/ BL-BAR4RC Series
Rechargeable Light Fixture
4’ USB charging Cord, (2)Metal plates with 3M
tape, (2)screws
IMPORTANT SAFETY INSTRUCTIONS
For use with 5VDC USB charger only
CAUTION: This product comes with the battery installed internally. DO NOT install or remove the battery
from the product. DO NOT dispose of batteries in trash, consult your local waste authorities for your
disposal/recycling options.
SECTION 1 –PREPARATION FOR INSTALLATION
Become familiar with the parts of the light fixture, see diagram1.
FEATURES
Slide magnets on for easy installation
Dimmable long life LED technology
3000/4000/5000K switch
Auto/Manual ON touch switch
Before first use, make sure to fully charge with Micro
USB cord (included) and wall charger (not included).
The charge indicator light will turn blue when fully
charged. See diagram 2
E
D
C
A
B
G
F
E
D
B
A
C
F
G
Diagram 1.
Diagram 2.