FJ80 Speedlight: Getting Started
Charging the
FJ80 Lithium Polymer Battery
1. Ensure the FJ80 is OFF by long-pressing the Power | Test button until the LCD screen turns off.
2. Remove the battery from the FJ80 by pressing the two buttons on the sides of the battery and
gently pulling the battery away from the FJ80 battery port.
3. Connect the FJ80 Power Cord to the FJ80 Battery Charger and plug the cord into a wall outlet.
4. Align the silver contacts on the back of the FJ80 battery with the two contacts on the FJ80
charger; while pressing the buttons on the side of the battery, gently insert the battery into the
charger and gently press down until the battery locks into place and the LED indicator turns red.
5. The battery is charged and can be safely removed from the charger when the LED indicator light
turns green.
6. Remove the battery from the charger by pressing the side buttons and gently pulling away from
the charger.
Battery Charger LED Indicator Light Colors
●
Solid Green Indicator LED
○
No Battery Inserted: The charger is plugged into a power outlet and ready to charge the
FJ80 Li-po Battery.
○
Battery Inserted: The FJ80 Battery is fully-charged and ready to be removed from the
charger.
●
Solid Red Indicator LED
○
Battery Inserted: The FJ80 Battery is correctly inserted and charging.
Reinserting the FJ80 Lithium Polymer Battery
Reinsert the FJ80 Battery into the speedlight by aligning the silver contacts on the back of the battery to
the contacts on the FJ80 battery port and gently press the battery into the port until it clicks into place.
DC Power Operation
1. Ensure the FJ80 battery is completely charged.
2. Ensure the battery is securely attached to the FJ80.
3. Turn the speedlight ON by long-pressing the Power | Test button, then tap the blue power logo
on the screen until the start-up screen appears.
Note: The FJ80 LCD Touchscreen is protected by a removable clear screen protector that can be
removed at any time by gently pulling the film away from the display.
Note: The FJ80 was designed to achieve 400+ full-power flashes with every battery charge. Achieving
this burst count requires that the touchscreen screen intensity be set to MIN in the Settings menu.
9