Westcott FJ-X2m, User Manual

Page: 14 / 16

Mobile Applications (iOS & Android)
The settings of the FJ400 can be adjusted through a mobile app via the FJ-X2m Wireless Radio Trigger.
The app will also allow for different scenes to be created and saved to minimize the same setup in the
future.
Initial Setup
Before pairing the FJ-X2m with the mobile device ensure that the FJ-X2m and FJ400 are communicating
by pressing the
​ TEST ​ button on the FJ-X2m to fire a test shot on the FJ400.
Turn ON Bluetooth® on the FJ-X2m
1. Turn on the FJ-X2m by long-pressing the ​ Power | MENU ​ button.
2. Press the 2nd and 3rd ​ Menu Selection Buttons ​ at the same time to enter the Settings Menu.
3. Scroll down on the ​ Selection Wheel ​ until the Bluetooth® icon is highlighted green.
4. Press down on the ​ Selection Wheel ​ to highlight [OFF] and press down on the ​ Selection Wheel
once to change the status to [ON].
5. Press ​ OK ​ to return to the main screen and notice the Bluetooth® icon in the bottom right-hand
corner.
NOTE ​ : Turning off the FJ-X2m will also turn off Bluetooth® functionality and the process above will need
to be repeated upon the next start-up.
Connecting the FJ-X2m to a Mobile Device
Apple iOS
1. Download the Westcott FJ400 mobile app from the App Store.
2. Turn on the FJ-X2m by long-pressing the
​ Power | MENU ​ button.
3. Turn on the FJ400 by long-pressing the ​ Power | MODEL ​ button.
4. Open the app on the mobile device.
5. The app will present a screen titled, “Select Devices,” where you will select the FJ-X2m from the
list of available devices.
6. The default screen will show two boxes; Studio 1 & the “+” symbol.
a. Click the Studio 1 box to set up your first scene.
b. Click the “+” box to create an additional Studio scene.
Android
1. Download the Westcott FJ400 mobile app from the GooglePlay Store.
2. Turn on the FJ-X2m by long-pressing the
​ Power | MENU ​ button.
3. Turn on the FJ400 by long-pressing the ​ Power | MODEL ​ button.
4. Pair the FJ-X2m with the mobile device in the Bluetooth® section of Settings by selecting FJ-X2m
from the list of available devices. ( ​ NOTE ​ : If prompted for a PIN use 000000.)
13