Confidential
Page 22
displayed in the control group dialog. As shown to the right, the power, channel, and volume can be
changed in this group. Select the new values and click save. The changes take immediate effect.
Monitor
The monitor page is used during
installation to detect unused
frequencies that the modulator
output can be configured to use,
and post install to visualize the coax
network usage and health. The only
configuration setting is the channel
map chosen. The default is US
Cable TV. The monitor will tune to
each of the frequencies in the
chosen channel map and report the
status. An empty row indicates an
unused frequency. The caution icon
indicates the presence of some signal, perhaps noise or an unknown modulation. A used
frequency band will have a green signal
icon. Frequency bands that are in use may also have
additional information if such information is available on the frequency. When selecting a frequency
band for the output modulator you will achieve the best results if you choose one that has no signal at
all. If none are available, one of the caution bands may be acceptable.
System
The System page is used for configuring
and monitoring system level features of
the MX-100 system.
Settings
This page provides a more comprehensive
view into the system configuration of the
MX-100.
Network: The network configuration is
shown both here and on the front panel.
Changes may be made on either UI. Click
on the gear
icon to configure any one of the four network ports. Ports configured and linked will
have a green icon. Red icons indicate an error. No icon indicates the port is disabled.
VPN: Use the
icon to configure a VPN connection.
