background image

9

This function is effect during AUTO 
SEEK operation.

• MONO/STEREO

Press 

MON

 button (1) to select mono 

or stereo mode. You can sometimes 
improve reception of distant stations 
by selection of mono operation

• AUTOMATICALLY MEMORY 

STORING & PROGRAM SCANNING

- Automatic Memory Storing

Press 

AS/PS

 button (18) for several

seconds, the radio searches from 
the current frequency and checks 
the signal strength until one cycle 
search is finished.  And then 6 
strongest stations are stored into the
corresponding preset number 
button.

- Program Scanning

Press 

AS/PS

 button (18) shortly to 

scan preset station.  When the field 
strength level is more than the 
threshold level of stop level, the radio
is holding at that preset number for 
several seconds with releasing mute,
then searches again.

• STATION STORING

Press any one of the preset buttons 
(14) (M1 to M6) to select a station 
which had been stored in the memory.
Press this button for several seconds,
current station is stored into the 
number button.

CD OPERATION

• SELECT TRACKS

During CD operation, press 

SKIP/MANU

       button (17) or 

SKIP/MANU

       button (16) to move 

to the previous track or the following 
track.  Track number shows on display.
During CD operation, hold 

SKIP/MANU

       button (17) or 

SKIP/MANU

       button (16) to fast 

reverse or fast forward.  CD play starts
from when you release the button.

• PAUSE PLAYING

Press 

PAU

 button (19) to pause CD 

player.  Press it again to resume play.

• REPEAT THE SAME TRACK

During CD operation, press 

RPT

 

button (21) to continuously repeat the 
same track. Press again to stop repeat.

• PREVIEW ALL TRACKS

During CD operation, press 

SCN

 

button (20) to play first several seconds
of each track on the current disc.  
Press again to stop intro and listen to 
track.

• PLAY ALL TRACKS

During CD operation, press 

SHF

 

button (22) to play all tracks on CD in 
random order.  Press again to cancel 
the function.

• EJECT

When the front panel is sliding down, 
press 

EJECT

 button (4) to stop CD 

playing and eject the disc from the disc
slot (5).

NOTE ON CD-R/CD-RW DISCS

• On this unit, in addition to an audio 

CD, you can play your original CD-R 
or CD-RW that contain audio titles.

• However, depending on the conditions

of the recording equipment or the
CD-R/CD-RW disc itself, some
CD-Rs or CD-RWs cannot be played 
on this unit.

• DO NOT stick paper or tape, etc. onto

the label side or the recording side of
any CD-R/CD-RW, as it may cause a 
malfunction.

OPERATION

Summary of Contents for 2641223












Reviews: