US/UN
Page
1
of
3
Overarching Linen Shade Floor Lamp
Assembly Instructions
Important Safety Instructions:
•
This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do
not alter the plug. Do not attempt to defeat this safety feature.
•
These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
•
For your safety and convenience, it is strongly recommended that two people install the lighting fixture.
•
This fixture has been rated for up to two
(2)
60-watt maximum TYPE A
standard incandescent light bulbs
(not
included) or two (2)
13-Watt compact fluorescent light bulb
(not included) or two (2)
9-watt SBLED bulb
(Included).
To avoid the risk of fire, do not exceed the recommended wattage.
•
Use with approved West Elm Shades only, having a minimum opening diameter of 4-1/2 inches and a minimum
lamp-to-shade spacing of 2-1/2 inches.
•
This lamp is meant for indoor use.
•
Save these instructions.
WARNING:
•
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture and
allow it to cool prior to replacing the light bulb.
•
Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
•
Keep flammable materials away from lit bulb
.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to
avoid accidentally discarding small parts or hardware.
Parts Included:
(A) Lamp Base (1)
(B) Lower Tube (1)
(C) Screws (8)
(D) Upper Curved Tube (1)
(E) Top Curved Tube (1)
(I) Diffuser (1) (not included)
(J) Lamp Shade (1) (not included)
(K) Finial (1)
(L) Threaded Rod (1)
(M) Sockets (2)
Hardware Included:
(F) Screwdriver (1)
(G) Allen Key (1)
(H) Allen Screw (1)
