P:
2 / 2
4.
Use a stud-finder to determine wall studs and install the proper hardware at each mark.
For stud marks:
Use a screwdriver to secure a screw directly into the wall remaining the screw head about 3/8 inch
from the wall.
For non stud marks:
First install an anchor into the wall and then secure a screw into the anchor. Also, remain the
screw head 3/8 inch protruded from the wall.
5.
Hang the item on the wall by engaging the appropriate two D-rings with the protruding screw heads.
CARE INSTRUCTIONS:
-
To clean: wipe with a soft, dry or slight damp cloth.
-
Do not use abrasive or strong chemical household cleaners.
-
A household glass cleaner may be used for the mirror surface
– spray the cleaner on a clean cloth first and then use
the cloth to clean the glass.
Thank you for your purchase!
Stores | Catalog | www.westelm.com
3
How to install the anchor?
Place a Phillips screwdriver into the
recess of the anchor and firmly press
the anchor into the wall while turning
it clockwise
until the anchor’s head
becomes flush with the wall surface.
5
3
4
A
B
B
A
B
