159315A
©Copyright 2020 WESCO Industrial Products, LLC. Specifications subject to change. Not responsible for errors or omissions.
ATTENTION: TO ENSURE SAFE AND EASY USE OF YOUR WESCO DRUM HANDLER, READ THESE INSTRUCTIONS BEFORE USING.
Drum Handler DM-800-MDT-PLPD
Operating Instructions and Parts Manual
Specifications
P/N MODEL
CAPACITY
WEIGHT
LIFT
HEIGHT
LIFT PER
STROKE
OVERALL DIMENSIONS
HALF DRUM
FULL DRUM
LENGTH WIDTH HEIGHT
240130
DM-800-MDT-PLPD
500 lbs
800 lbs 751
lbs
77-1/2” 1”
67” 48” 66”
LIMITED WARRANTY
WESCO INDUSTRIAL PRODUCTS (WESCO) warrants to the purchaser of this product for a period of ninety (90) days from the date of purchase that this product shall be free of
defects in material and/or workmanship, as follows:
1. WESCO will supply, at no charge, new or rebuilt replacements for any part that fails through a defect in material and/or workmanship during the warranty period. To obtain warranty
service, you must deliver the product prepaid, to the WESCO factory.
2. This warranty does not cover any product or product part which has been subject to accident, misuse, abuse or negligence. WESCO shall only be liable under this warranty if the
product is used the manner intended by the manufacturer as specified in the written instructions furnished with this product.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. ANY EXPRESS WARRANTY NOT PROVIDED IN
THIS WARRANTY DOCUMENT, AND ANY REMEDY FOR BREACH OF CONTRACT THAT, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW,
IS HEREBY EXCLUDED AND DISCLAIMED. UNDER NO CIRCUMSTANCES SHALL WESCO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, EXPRESS OR IMPLIED, A BREACH OF CONTRACT OR OTHERWISE. EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED
IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long any implied warranty lasts, so the above limitations may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Description
The Wesco Ergonomic Drum Handler DM-800s are designed
specifically for lifting, rotating and transporting 55-gallon steel
and poly drums.
This product is distributed by:
Wesco Industrial Products, LLC
1250 Welsh Road
North Wales, PA 19454
Tel: 215-699-7031 Fax: 215-699-3836
Contact the factory for parts information and ordering.
Visit us on the web at www.wescomfg.com
Unpacking
When unpacking the Wesco Product, check carefully for
shipping damage and missing parts. If damage has occurred
or any parts are missing, file a claim with the delivering carrier
within 24 hours and notify the dealer from whom the unit was
purchased.
Warranty Repairs
If the unit does not work properly, contact your dealer or the
factory (215-699-7031) for units less than 90 days old.
Non-Warranty Service
If units are older than 90 days, repairs can be made easily on
site with factory supplied parts.
NOTE:
Do not send units to the factory for service without
first obtaining a “Return Merchandise Authorization” (RMA)
number from the customer service department. We will not
be responsible for merchandise returned without proper
authorization.
General Safety Information
Warning: The Wesco DM-800 Ergonomic Drum Handler is
designed for specific functions. To ensure proper use,
the following instructions must be adhered to:
(1) Maximum
capacity
– Half Drum
500 lbs. (227 kgs)
– Full Drum
800 lbs. (363 kgs)
(2)
DO NOT
exceed rated capacity. Injury to persons or
property may result from overloading and misuse.
(3) This product is designed for use on level, improved
surfaces only.
(4)
DO NOT
transport load more than 3" above floor.
(5) Transport load in upright position only.
(6) Do not leave unit unattended with load in raised position.
(7) Keep hands and feet clear of clamping saddle, chain,
mast, and wheels.
(8) Clamping
saddle
must
be in full contact with drum rim
and clamped to drum prior to lifting.
(9) Be certain rim of fiber or plastic drum is able to withstand
the stress of drum lifting procedure.
(10) Lubricate all moving parts periodically. Make sure all
hardware is properly tightened at all times.
(11) Tilt load with caution, making sure to maintain control.
(12) Remove unit from service if parts are missing or loose.
