179013E
Description
The Wesco Non-Sparking Drum Deheader is designed
specifically to open 30 and 55 gallon steel drums. It features
a sharp edged hardened non-ferrous alloy replaceable blade
and a comfortable plastic hand grip.
This product is distributed by:
Wesco Industrial Products, Inc
1250 Welsh Road
North Wales, PA 19454
Tel: 215-699-7031 Fax: 215-699-3836
Contact the factory for parts information and ordering.
Visit us on the web at www.wescomfg.com
Unpacking
When unpacking the Wesco Product, check carefully for
shipping damage and missing parts. If damage has occurred
or any parts are missing, file a claim with the delivering carrier
within 24 hours and notify the dealer from whom the unit was
purchased.
Warranty Repairs
If the unit does not work properly, contact your dealer or the
factory (215-699-7031) for units less than 90 days old.
Maintenance
(1) Lubricate moving parts periodically.
(2) Check bolts and nuts frequently for tightness.
(3) Refer to steps 2 & 6 under General Safety Information
Figure 1
Non-Sparking Drum Deheader
(Part # 272301)
Operating Instructions and Parts Manual
ATTENTION: TO INSURE SAFE AND EASY USE OF YOUR WESCO DRUM
DEHEADER, READ THESE INSTRUCTIONS BEFORE USING.
General Safety Information
Warning: The Wesco Drum Deheaders are designed for
specific functions. To insure proper use, the following
instructions must be adhered to:
(1) The Drum Deheaders are designed for use with steel
drums only. Do not use to open any type of fiber or plastic
drums.
(2) All threaded parts must be tight except for use the
adjustment knobs. Check frequently to be sure that no
parts are loose. If any parts are loose, remove the unit
from service and repair.
(3) Non-Sparking Deheader adjustment handle should be
hand tight only.
(4) The E-Clips (P/N 170513) and Cutting Blade (P/N
272302) for non-sparking Drum Deheader (P/N
272301) are made from Beryllium Copper Alloy. This
material is considered hazardous by the OSHA
Hazard Communications Standard (29 CFR
1910.1200).
Never grind, sharpen, drill, or machine Beryllium
copper parts. Any of these processes will generate
Beryllium Copper dust that is harmful if inhaled. Do
Not breathe this dust, it may cause cancer. Wash
hand thoroughly after handling. Buy only original
replacement E-Clips and blades from Wesco.
(5) Bronze and Brass components of this product
contain lead or arsenic. The state of California under
Proposition 65 has determined that exposure to these
chemicals is known to cause cancer or birth defects
or other reproductive harm. Please wash hands after
use.
(6) After using the Drum Deheader to cut a drum’s lid, use
extreme care when lifting the cut lid from the drum. Avoid
rubbing your fingers or hands along the inside of the
chime where the cut was made.
(7) Use only genuine Wesco replacement parts when
servicing.
Replacement Parts
Item
Part No.
Description
Material
Qty
1 170501 Handle
Aluminum
1
2
170502
Rim Guide
Aluminum Bronze
1
3
170503
Body
Leaded Red Brass
1
4
272302
Cutting Blade
Beryllium Copper
1
5 170505 Link
Aluminum
Bronze 2
6
170506
Link Pin
Aluminum Bronze
2
7
170507
Adjustment Handle
Manganese Bronze
1
8
170508
Adjustable Knob
Aluminum Bronze
1
9
170509
Shoulder Screw
Aluminum Bronze
1
10 170510 Lockwasher
Bronze
2
11
170511
Hex Head Screw
Bronze
2
12 170512 Handgrip
Vinyl
Plastic
1
13 170513 E-Clip
Beryllium
Copper 2
Industrial Products, Inc.
1
2
3
4
5
6
7
8
9
10 11
12
13
**
**
*
**
**
**
**
**
**
**
*
*
**
