Werner Co.
93 Werner Road
Greenville, PA 16125
1(888) 523-3371 / www.wernerco.com
P/N 124285-01 REV A 2/21
10,000-lbf (44kN) Removable Bolt
(Multi-Use Only) Model: A519010
MAINTENANCE, CLEANING AND STORAGE
Cleaning periodically will prolong the life and proper functioning
of the product. The frequency of cleaning should be determined
by inspection and by severity of the environment. Clean with
compressed air and/or a stiff brush using plain water or a mild soap
and water solution. Do not use any corrosive chemicals that could
damage the product. Wipe all surfaces with a clean dry cloth and
hang to dry, or use compressed air. When not in use, store anchorage
connectors in a cool, dry, clean environment, out of direct sunlight
and free of corrosive or other degrading elements.
Read This Instruction Manual Carefully Before
Using This Equipment.
User Instructions must always be available to the user and
are not to be removed except by the user of this equipment.
For proper use, see supervisor, User Instructions, or contact
the manufacturer.
Users and purchasers of this equipment must read and
understand the User Instructions provided for correct use
and care of this product. All users of this equipment must
understand the instructions, operation, limitations and
consequences of improper use of this equipment and be
properly trained prior to use.
Misuse or failure to follow
warnings and instructions may result in serious personal
injury or death.
Purpose
The A519010 is an anchorage connector designed
to function as a lift point or other nonlife dependant
applications. Any references to “anchorage connector” in this
manual include, and apply to, the A519010.
Use Requirements
1. Use of this product must be approved by an
Engineer or other qualified person to be compatible
with any and all structural & operational
characteristics of the selected installation location
and system to be connected to this anchor.
Improper
may result in serious personal injury or death.
2. The anchorage connector must be inspected prior to
each use for wear, damage, and other deterioration.
If defective components are found the anchor
connector must be immediately removed from service
Use Limitations
1. The anchorage connector is designed to be used in
temperatures ranging from -40°F to +130°F (-40°C to
+54°C).
2. Do not expose the anchorage connector to chemicals
or harsh solutions which may have a harmful effect.
3. Do not alter or modify this product in anyway.
4. Do not use/install equipment without proper
training by a “competent person”
5. Do not remove the labeling from this product.
6. Additional requirements and limitations may apply
depending on anchorage type and fastening option
utilized for installation. All placements must be
approved by an engineer or other qualified person.
*Improper use may result in serious personal injury or
death.
V1.6-A
Patent # US 7,357,363 B2 / US 7,011,281 B2 / US 6,729,821 B2
WARNING:
ALL USERS OF THIS EQUIPMENT MUST READ AND
UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY
RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE
FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS
EQUIPMENT. ALL USERS OF THIS PRODUCT MUST BE PROPERLY
INSTRUCTED ON HOW TO USE THE DEVICE. AVOID CONTACT
WITH PHYSICAL HAZARDS (THERMAL, CHEMICAL, ELECTRICAL,
ETC.). MAKE ONLY COMPATIBLE CONNECTIONS.
