Detailed Description of the Parameters
.
CTW900 | 61
7
DETAILED DESCRIPTION OF THE PARAMETERS
7.1
PARAMETER STRUCTURE
In order to facilitate the setting and monitoring tasks, the CTW900 parameters are arranged in groups divided
into up to three different levels.
Thus, when the right soft key is pressed in the monitoring mode (“Menu”), the first four groups are shown on the
display, and it is possible to browse the other groups with the “
” and “
” keys. One example
2
of the parameter
group structure of the CTW900 is shown in Table 7.1.
Table 7.1
– Parameter group structure of the CTW900
Level 0
Level 1
Level 2
Level 3
Monitoring
00 ALL PARAMETERS
01 PARAMETER GROUPS
20 HMI
21 Ramps
22 Speed References
23 Limits
24 Speed Feedback
25 Control Options
26 REGULATORS
100 Speed Regulator
101 Current Regulator
102 Field Regulator
103 EMF Regulator
27 Local Command
28 Remote Command
29 Run/JOG Config.
30 Zero Speed Logic
31 Multispeed
32 Analog Inputs
33 Analog outputs
34 Digital inputs
35 Digital Outputs
36 Drive Data
37 Motor Data
38 Protections
39 COMMUNICATION
110 Local/Rem Config.
111 Status/Commands
112 Serial RS232/485
113 Anybus
40 SoftPLC
41 Trace Function
02 ORIENTED START-UP
03 CHANGED PARAMETERS
04 BASIC APPLICATION
05 SELF-TUNING
06 BACKUP PARAMETERS
07 I/O CONFIGURATION
32 Analog Inputs
33 Analog Outputs
34 Digital Inputs
35 Digital Outputs
08 FAULT HISTORY
09 READ ONLY PARAMS.
7.2
PROPERTIES OF THE PARAMETERS
In order to describe the parameters in this manual, some abbreviations are used to represent their properties:
2
The number and name of groups may change depending on the software version used.