39
2D-/3D Profile Sensors
6.2.1 Device, General
This is the sensor’s initial page which displays all relevant information concerning the device such as order
number, product version, manufacturer, description, serial number and MAC address, as well as hardware
and firmware version. These entries play an important role in the event of technical problems and when
contacting
Technical Support with questions.
6.2.2 Device Settings
Content is subdivided into 3 categories:
Network settings
The desired address ranges can be entered to the
“IP Address”, “Subnet Mask and “Standard Gateway”
fields. These addresses permit operation, as well as communication between the sensor and your network
(PC).
CAUTION!
• If you don’t have access to information concerning available address ranges within your
network, contact your IT department first.
• Incorrect entries may result in network conflicts.
• The sensor’s IP address must differ from the IP address of the PC.
After the desired changes have been made, enter the web server password (
admin) to the field and click
“OK”. The changes are activated without restarting the sensor. In order to return to the integrated website,
enter the new IP address to your web browser’s address line.
