Wenglor P1PY1 Series, Operating Instructions Manual

Page: 31 / 38

31 Long-Range Laser Distance Sensors
7.1.4 Condition Monitoring Functions
7.1.4.1 Status Message Function
The sensor provides a large number of different status messages. Due to the process data structure,
four status messages can be transmitted as individual process data.
These parameters can be used to set the status messages that are transmitted via the process data.
Function Possible Settings Default
Message 1
See table “Status Messages” on
page 32
Warning signal
Message 2
See table “Status Messages” on
page 32
Optics dirty
Message 3
See table “Status Messages” on
page 32
Ambient light
Message 4
See table “Status Messages” on
page 32
Versions without an acceleration sensor:
Temperature too high
Versions with an acceleration sensor:
Acceleration sensor
7.1.4.2 Warning/Error Output Function
The status messages used to trigger the collective message can be defined for the warning output and the
error output respectively. The status messages are OR-linked so that the output is activated when one of the
defined status messages is activated.
Function Possible Settings Default
Warning output See table “Status Messages” on
page 32
Signal warning, optics dirty, ambient light, tem-
perature too high, temperature too low, undervolt-
age, interference in the working range
Error output See table “Status Messages” on
page 32
Object too close, object too far, no signal, device
error, over-temperature, short circuit