15
4.7.2. Selecting the Light pulse frequency
Display of actual Light pulse frequency:
• Set rotary selector switch (07) to Power Save
è
Plus button (24) lights up: With the rotary selector switch set to Run, the light pulse frequency
is 7.58 kHz.
è
Minus button (25) lights up: With the rotary selector switch set to Run, the light pulse frequency is
6.10 kHz.
è
No button lights up: With the rotary selector switch set to Run, the light pulse frequency is
maximum 10 kHz.
Delete the Light pulse frequency setting:
• Set rotary selector switch (07) to Power Save
• Activate the lighted up button
è
No button is lighted up
è
Light pulse frequency is max. 10 kHz
• Set rotary selector switch (07) to Run
Select a Light pulse frequency:
• Set rotary selector switch (07) to Power Save
• Activate the plus button (24)
è
Plus button (24) lights up
è
Light pulse frequency 7,58 kHz
• Set rotary selector switch (07) to Run
• Set rotary selector switch (07) to Power Save
• Activate the minus button (25)
è
Minus button (25) lights up
è
Light pulse frequency 6,10 kHz
• Set rotary selector switch (07) to Run
The Light pulse frequency in the Power Save Mode is unchangable 5,06 kHz.
Note:
If the rotary selector switch is not set to Run within one minute after pressing the key, the light pulse
frequency is not changed. The maximum switching frequency is reduced in proportion to the light pulse
frequency.
