29
8.5. Device Test
For functional description of device test see chapter “6.8. I/O Test” on page 16.
The test is activated as soon as at least one parameter is changed.
The length of the test is limited to 10 minutes. Afterwards, the test is terminated automatically. The remaining
time of the test is displayed under the button “Switch off” and below the display window. The test can also be
terminated prematurely by clicking on “Switch off”.
Note: Settings are retained in the online state as well.
9. Maintenance Instructions
• This wenglor Sensor is maintenance-free.
• It is recommended to clean the lens and the display regularly and to check the socket connections.
• Do not use any solvents or cleaning agents to clean the Sensor, which could damage the device.
10. Proper Disposal
wenglor sensoric GmbH does not take back unusable or irreparable products. When disposing of the products,
the relevant national regulations for waste disposal apply.
11. EU Declaration of Conformity
The EU declaration of conformity can be found on our website at www.wenglor.com in download area.
Summary of Contents for OCP P0150C Series
Page 23: ...23...
