Wenglor CSMH007, Operating Instructions Manual

Page: 19 / 85

19 1D/2D Handheld Scanners
8.2 Operator interface
The depicted layout of the operator interface shows the standard configuartion of the software upon first use.
However, the user interface can be adapted to meet your individual needs.
8.3 Establishing connection
1. Open the eazyScan2 software.
2. Plug the USB cable or RS-232 jack into your PC.
3. If an RS-232 scanner is to be connected, the COM port used must be selected in the software.
4. The scanner will connect automatically. Two beeps will be heard when the scanner was connected correct-
ly. With an RS-232 scanner, the Reload symbol must be pressed to start the search for RS-232 scanners.
5. USB scanners start in USB keyboard mode, which is set in download mode by clicking the -icon.
When the mode has been changed, the scanner and its device information will appear in the software.