manualshive.com logo in svg

Wenger Piano Work Desk, Assembly Instructions, Page: 1 / 4

Share
Download
Wenger Piano Work Desk Assembly Instructions Download Page 1

Assembly Instructions

Piano Work Desk

Note:

Please read and understand these Assembly Instructions for the Piano Work Desk
before assembling the parts.

Note:

Remove all items from the shipping cartons and arrange them in a convenient location. 
Refer to the illustrations on the following pages. If you need additional information, write
or telephone the Wenger Corporation using the information below.

c

ontents

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important User Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

©Wenger Corporation 2011

Printed in USA 06/11

Part #225A108-01

Wenger Corporation,

555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: 1-800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com

Summary of Contents for Piano Work Desk

Page 1: ...e following pages If you need additional information write or telephone the Wenger Corporation using the information below contents Warranty 2 Important User Information 2 General 2 Manufacturer 2 Intended Use 2 Required Tools 3 Fasteners 3 Assembly 3 Wenger Corporation 2011 Printed in USA 06 11 Part 225A108 01 Wenger Corporation 555 Park Drive P O Box 448 Owatonna Minnesota 55060 0448 Questions C...

Page 2: ...state to state WArrAnty importAnt user informAtion GENERAL Copyright 2011 by Wenger Corporation All rights reserved No part of the contents of this manual may be reproduced copied or transmitted in any form or by any means including graphic electronic or mechanical methods or photocopying recording or information storage and retrieval systems without the written permission of the publisher unless ...

Page 3: ... 2 3 4 5 1 Attach the two Upright Weldments to the underside of the Top Panel Assembly using two 1 4 20 x 787 Machine Screws through the bottom and two 1 4 20 Insert Nuts through the top on each side as shown Note A plastic or rubber mallet may be used to tap the Insert Nuts into place Assembly Upright Weldment 1 4 20 x 787 Machine Screws 1 4 20 Insert Nuts 1 4 20 Insert Nuts Top of Top Panel Asse...

Page 4: ...ecuring the keyboard stand crossbrace to the uprights IMPORTANT The crossbrace must be held in place when the fasteners are removed b Place the Piano Work Desk over the keyboard stand on the outside of the uprights Align the empty round holes of the Brackets with the holes into the crossbrace as shown c Replace the fasteners that were removed to now include the Piano Work Desk Brackets Assembly co...

Reviews:

No comments