Wenger Nota Assembly And Operation Instructions Manual Download Page 1

Assembly and Operation Instructions

Nota

®

Conductor’s Chair

Note:

Please read and understand these instructions before assembling the parts.

Note:

Remove all items from the shipping cartons and arrange them in a convenient location. 

Refer to the illustrations on the following pages. If you need additional information, 

contact the Wenger Corporation using the information below.

C

ONTENTS

©Wenger Corporation 2014

Printed in USA 12/14

Part #157D209-02

Wenger Corporation,

555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: 800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . .2

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Manufacturer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Intended Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Summary of Contents for Nota









Reviews: