background image

Important User Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2

Safety Precautions  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

General  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Manufacturer  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Intended Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Warranty  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Moving the Kiosk � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4

Kiosk Set Up � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5

LED Light Fixture� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7

Slatwall Kit Components � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8

Kiosk Take Down � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9

Care and Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

Cleaning   � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

Maintenance  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

Transporting the Kiosk  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11

Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12

Owner's Manual

Mobile Kiosk

©Wenger Corporation 2020 

Printed in USA 2020-10 

Part #240B121-01

Wenger Corporation,

 555 Park Drive, P�O� Box 448, Owatonna, Minnesota 55060-0448

Questions? Call�����USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp�com

Contents

Note: 

Please read and understand these instructions before operating the Mobile Kiosk�

Note: 

If you need additional information, contact Wenger Corporation using the information below�

Visit the GearBoss Mobile Kiosk web page at gearboss.com for more information.

Summary of Contents for Mobile Kiosk













Reviews: